Welcome,[Login]  [Reg] 中文版 ENGLISH Sitemap Contact us
 
   
 
 
 

DUCIS PRECISION MACHINERY EQUIPMENT CO.,LTD

TEL86-769-85305424-5

      86-769-85352570
FAX86-769-85305426
E-
MAILducis3@163.com
WEBhttp://www.ducis3.com
ADDCangshi Hi-teck Park, Wusha Liwu,ChangAn Town,Dongguan City,Guangdong,China

SERVICE QQ点击这里给我发消息

 
  首页>>News
 

How to choose the safety light?

点击数:14432013-04-20 09:16:18 来源: DUCIS PRECISION MACHINERY EQUIPMENT CO., LTD.

How to choose the safety light?

 

the safety light Brief Introduction:

When the operator or the detecting device incorrectly enter the dangerous areas of the working machine, for example, the press machine and the cutting machine, the safety device would detect through the infrared sensor and stop the working machine so as to prevent body injury and device damage.

Owing to such non-touch detecting method applied in this device and the infrared sensor instead of the common safety device, would make sure the safety without affecting or lowering the operation efficiency.

 

the safety light Features:

High performance, high reliability:authorized light block width with the minimum detection deameter 20mm can realize the reliable inspection, the two accessional operation buttons make sure of the safety.

The operation improvement: the mon-touch method of infrared sensor is applied to this device, which makes the operation easier and maintains the efficiency.

The easy installation and adjustment: reflection type sensor is apt to set up the optical axis. With the special keeper, it can readily adjust it’s height and angle.

Prompt operation: with the most advanced electronic circuit, the device can start safety detection with 20ms or below.

Power-off protecttion: the circuit design strictly daheres to the safety-oriented, in case of the emergency-stop such as power off, disconnect of power line and hindrance of the circuit, the safety could be first assured. The device is with top reliability.

Safety control system: self diagnosis function when the output relay is out of order, the flickerring of danger lamp would notify emergency state to operators. At the same time, the output devece is off.

Simple repair and maintenance: there is no need yto change parts except output relay.

 

DUCIS PRECISION MACHINERY EQUIPMENT CO., LTD.

 

TEL 86-76985305424-5 85352570 85336856

 

Service Numbers400 0255 125

 

FAX86-769-85305426

 

Email: shenhao@ducis3.com

 

Websitehttp://www.ducis3.com/www.ducis8.com./www.申皓.com

 

Add 3F-3. No.62, Zhen-An Road.Chang-An Town, Dongguan City, Guangdong, China  

 

On-Line shophttp://ducis.cn.alibaba.com

              http://ducis3.cn.alibaba.com

              http://ducis8.taobao.com

 

上一页1下一页
【责任编辑:(Top) 返回页面顶端
 

     SEO KEYWORDS:Stamping die  computerixed Slug Detector,Stamping Die Error-Larrying Device,Press machine Hands-Protector Safety Devices,stagger feeder,Coil cradle,Suck waste machine,scrap chopper,Terminal recoiler,

                                      spray oil feeder,Sensor,Junction Cables,Photo switch ,fiber or fiber sensor,load monitoring system,Press,Shenhao,DUCIS,Double-side material lubricating oil feeder,Computerized slug detector

Dimensions | Troubleshooting | Q & A | ALIBABA | TAOBAO | Business scope

DUCIS  PRECISION MACHINERY EQUIPMENT CO.,LTD  Managment

TEL:86-769-85305424-5 86-076985352570 FAX86-769-85305426 E-MAILducis3@163.com

ADD:Cangshi Hi-teck Park, Wusha Liwu,ChangAn Town,Dongguan City,Guangdong,China

Adsense tools: